3 Mistakes In GARAGE DOOR REPAIR That Make You Look Dumb
Garage door repair may often be achieved by the homeowner themselves. There are at least 5 simple things to check, before calling a professional. Some repairs are extremely easy. For example, a stiff or a squeaky door will merely require a good cleaning and lubrication. Other repairs, such as for example repairing a torsion spring, are really dangerous and require help from a professional.
Before proceeding to the repair, be sure to unplug your garage door opener, in order that you do not get an electric shock when you are repairing your garage door. You’ll most likely be sitting on a ladder, that is a very bad spot to get an electric shock, since you may also fall off the ladder. Also, be sure you wear safety glasses when working with power tools.
Here is a set of what to garage door repair North Las Vegas NV check before calling for a specialist for your garage door repair:
1. Check the Metal Tracks for Damages
This easy garage door repair tip may often solve the problem very fast. The metal tracks often may have dents or bumps. If you find such damages, strike the damaged area of the track with a wood block and a hammer to straighten the track.
2. Check the Alignment of the Tracks
If the tracks aren’t aligned well, they might be causing the door never to work. It’s not always essential to unscrew the tracks; you can just try to loosen the bolts or screws also to tap the tracks slightly into position. Work with a level to check on the alignment of the tracks. Aligned tracks enables you to be done together with your garage door repair very quickly.
3. Dry and clean the Tracks
Even though it may sound obvious, but hardened dirt and old lubricant may be the cause of the garage door sticking. In cases like this, your garage door repair may contain merely cleaning the tracks and drying them. You can utilize regular cleaners to completely clean the tracks.
4. Lubricate the Tracks and the Rollers
Merely lubricating both, the tracks and the rollers, can fix the problem and conclude your garage door repair in no time. For lubrication, you may work with a lubricant spray or a silicon spray. It is probably easier to lubricate the tracks after cleaning them. Actually, any movable part will reap the benefits of lubrication.
5. Tightening the Loose Bolts and Screws
Bolts and screws tend to become loose with time. Try to check all the screws and bolts mixed up in opening/closing mechanism of your door. Sometimes, merely tightening them may solve the complete problem. If you cannot tighten the screws, as the holes themselves have become loose, then you can use a “wood filler” or bits of normal wood to fill the holes.
What Not to Do?
If you have tried each and every one of the above solutions, and do not require have worked, the problem may be the door spring. However, it is advised never to perform your garage door repair if the issue appears to be the spring, especially if it’s a torsion spring. Unfortunately, there have been numerous cases, where folks have gotten injured and even killed by the garage door springs. One of the common injuries is really a hit in the head, resulting in serious trauma to the mind.